Compressed Air Dryer

Product Details:

The Internally Heat Reactivated Air Dryer is a simple alternative for medium & bigger capacities where Heatless Dryers become uneconomical due to heavy purge losses. In this type of Dryer, the regeneration is accomplished with a very small portion of dried air/gas. This is circulated in the tower duly filled with desiccant and embedded with heating elements. The advantage of this type of dryer is that purge loss is reduced to almost 3 – 5%, and dew points up to (-) 80 °C can be achieved.

This is an improved version of the Heatless Dryer where purged air loss is low due to the fact that regeneration is achieved by dry air at low pressure and at high temperature. To achieve this heaters are provided in each tower to heat the purge air to around 180 Deg C, which enhances its moisture carrying capacities. This hot purge air at low pressure is passed through the desiccant bed to regenerate the Activated Alumina.

Nuberg GPD has a long standing experience of manufacturing Air Dryers for various industrial needs. We have been in the business for over 20 years, and are continuously expanding ourselves to provide the best service to our clients. We are under collaboration with CarboTech to bring you the highest quality products. 

FEATURES

• Capacity: 200 CFM to 1000 CFM
• Dew Point: -60 to -80 deg C ADP
• Purge Loss: 5-10

• Synthetic Fiber Industry
• Chemical Process Industry
• Air Curtains
• Other Miscl. Industrial Applications

Product Details:

The Heat Compression Air Dryer is designed to take advantage of the natural tendency to desiccant to established equilibrium with their surroundings and can deliver super dry compressed air. These types of Dryers are the most economical and dew point up to (-)60 °C is easily achieved. Such dryers are mostly preferred for flow up to 6000 cfm.

The Heat Compression Air Dryers are ‘No-Purge Loss’ type desiccant dryers based on the adsorption principle. The hot air from the Compressor at min 120 deg C and higher temp, is used directly for the regeneration of the desiccant. After regeneration, this air is cooled down to 40 deg C and then it is dried in the second tower. Thus, the use of heaters is eliminated. For eg. in the 6+6 Hrs. Cycle the hot air is fed for regeneration for 4 Hrs. and for balance 2 Hr. a changeover takes place where the air is first cooled in a cooler, then dried and before going to the outlet, cools the regenerated desiccant bed, thus bringing it down to ambient temperature. This cycle is reversed for the next 4Hrs. where the Adsorber Drying the air in the previous cycle goes for regeneration and vice versa.

Heat Compression Air Dryer has the least running cost with the best quality of air.

Nuberg GPD has been manufacturing Air Dryers since its inception in 1996 and has developed various types to meet various industrial requirements. Nuberg GPD has collaborated with CarboTech to deliver optimal products. 

• Having the least running cost
• Best quality of air
• Lesser payback period
• Continuous duty with long efficient service life
• Easy to install and user friendly

Product Details:

The Heatless Air Dryer Unit is designed to take advantage of the natural tendency to desiccant to established equilibrium with their surroundings and can deliver super dry compressed air. These types of dryers are the most economical and dew point up to (-)40 °c are easily achieved. Such dryers are mostly preferred for flow up to 500 cfm.

In this Dryer, two desiccant towers are used. While one tower is in drying, the second tower undergoes regeneration simultaneously.

Part of the dry air coming out from the tower in-line goes for the regeneration of the second tower.
Tower changeover takes place every 5 minutes by a sequence controller mounted in the control panel.

Nuberg GPD employs a host of different methods to attain the best possible products. As such, it is able to provide the safest and most durable of products. Its gas generators are leading the way around the world. 

We are under technical collaboration with CarboTech to bring you the latest of products. 

• Excellent functionality
• High efficiency
• Superior performance
• Robust construction

• Synthetic Fiber Industry
• Chemical Process Industry
• Air Curtains
• Other Miscl. Industrial Applications